Portech MV-3716, User Manual

Page: 34 / 97

-30-
(3)LAN Dial tone Gain: To adjust dial tone gain down of LAN.
(4)Routing Range: The route table -50 sets can share by two
channels(1,2 ch / 3,4 ch / 5,6 ch / 7,8 ch )
ex: Mobile 1 use the route table for item 0-24,
Mobile 2 use the route table for item 25-49
(5)CODEC Tx Gain: as above
(6)CODEC Rx Gain: as above
(7) SIP From: Caller ID transfer

Tel/User (Standard): If you need to register to Asterisk and proxy
server, please choose this option. And how to transfer the caller ID
to LAN, please refer 21.How to setup Asterisk to receive Caller ID
from MV-3716/MV-3732 (page 42)
MV-3716/MV-3732 will send the message as follows in the
Packet.
From: “caller number” <sip:3001@192.168.0.228>;tag=51088abb

User/User (Standard): If you need to register to Asterisk and proxy
server, please choose this option.
MV-3716/MV-3732 will send the message as follows in the
Packet.
From: " 3001" <sip:3001@192.168.0.228>;tag=51088abb

Tel/Tel :
MV-3716/MV-3732 will send the message as follows in the
Packet.
From: "caller number" <sip: caller number @192.168.0.228>;tag=6ac93f7c
※
Please note: If you choose this option, please don’t register to
Asterisk and proxy server. Please only fill proxy server IP and
choose Active: on (else field empty) in sip setting/service domain