MT-350 SMS Manual 1
1.
Hardware Setup
Connect the RS232 cable between PC & MT360. Any serial port of the PC can be
used(The software program uses COM1 as default). Make sure the SIM card has been
inserted in position and the MT360 power is on.
2.
Software Setup
The software program ‘MTSMS.exe’ run under the OS : Windows 98/ME/2000/XP. It is
recommended to run in the display mode ‘1024*768’.
Create a new directory in drive C: as a working directory, for example, “C:\MTSMS”.
Copy the software program ‘MTSMS.exe’ into this directory.
To execute the ‘MTSMS.exe’ program for the first time, the program will show a setup
dialog to allow the user to setup the configuration. (Figure as below)
‘Mobile number prefix’ field : To check if the mobile number the user entered is a valid
one. The value “09” means that the mobile number begins with “09”.
‘Mobile number digits’ field : The digit length of the mobile number. The value “10”
means that there are 10 digits in the mobile number.
‘COM port’ field : The serial port which is used to connect your PC to the MT360.
The user may change these values according to the real situation of your country.
If the COM port you entered is not ‘1’, then you have to close the program and execute
again.
The user may change all these values after the first time setup by clicking the menu
‘File/System Parameters’
