IS-381/IS-382/IS-3840 User manual
20
Step 5: back to the main interface after firmware updating, please press [reload (F5)].Conduct other
settings.
10.2
Default Setting
Restore Default Setting provides data content of all change setting (not containing data in Network)
to restore default setting value; the system will automatically restart.
Column
Introduction
Restore [key]
Remove all change setting data to restore default setting.
Step 1: click [Update
Default Setting] in the main interface to enter [Restore Default Settings].
Please press [Restore] to restore default, to clear all settings and restart the equipment
automatically (as shown in the following ficture).
Step 2: enter the informatoin prompt interface to finish clear setting and restart the system, please
wait (as shown in the following picture).
