11
10. Update
10.1 New Firmware
Code Type
Preset to be Risc (.gz). Select the type of documents to be
updated. Provide Risc (system firmware. gz) and DSP
(DSP
firmware. ds) updating modes.
File Location
Input file positon or name to be updated or press [Browse] to
select file data; version name of the file to be updated.
Submit[key]
Execute storage and change setting.
Reset [key]
Clear input data.
Step 1: click [Updte€New Firmware] on the surface to enter [Update Firmware], to set
version to be updated and select Code Type: Risc, then set File Location data, to
set [Broswe] key (as shown in the following picture).