Portacool PAC163SVT, Owner'S Manual

Page: 9 / 28

GENERAL OPERATION
(OHFWULFDO&RQQHFWLRQ
PRODUCT MUST BE IN UPRIGHT POSITION WITH COOLING PADS INSTALLED!
All models utilize a single power cord and control switches. Before connecting the plug to an outlet, ensure there is no standing water where the cord may lie or
where the operator is standing. The use of separate multiple outlet devices is not recommended. When making electrical connections, ensure compliance to local
and national codes. Use only with GFCI Protected Receptacles. Please refer to the Barcode Product Label on the side of the product for specific electrical
re
T uirements.
OPERATING PROCEDURES
S SHFLILFDWLRQV
Each Portacool evaporative cooler has its own set of operational specifications, sizes, weights, voltage fre T uency, current re T uirements, etc. Please ask for the
specifications for your model from your distributor, check the serial number plate, or visit www.portacool.com for the specifications for your product.
P ODFHPHQW RI WKH P RUWDFRRO E YDSRUDWLYH C RROHU
There are three primary considerations when deciding where to place the Portacool evaporative cooler.
1) Make sure there is a clear, unobstructed path to provide maximum airflow.
2) If the evaporative cooler is positioned on a raised platform, ensure the platform constructed for holding the product is stable, well constructed, and will not
allow the product to tip over and that it allows for the full weight of the evaporative cooler including water in the tank. The product must be level and in the upright
position.
8