![PortaCo D-60S09-F7-S Operation, Maintenance, And Repair Manual Download Page 3](http://html1.mh-extra.com/html/portaco/d-60s09-f7-s/d-60s09-f7-s_operation-maintenance-and-repair-manual_1580568003.webp)
3
1.0 INTRODUCTION
1.1 General Information
This manual presents installation,
operation, and maintenance information
for the D-60S09-F7-S PortaCo, Inc.
Hydraulic Power Unit. Its main purpose
is to provide auxiliary hydraulic power
for steering, electrical power for lights
and break modulation for towing a
disabled Off-Highway Truck.
Other uses are to provide hydraulic
power for unloading a disabled loaded
truck, to make towing easier and can be
used as a portable 35 Amp-24 Volt DC
battery charger.
The D-60S09-F7 Power Unit must be
used with additional Attachment Groups.
The Attachment Groups contain all the
necessary hydraulic fittings, hoses, and
electrical cables to connect to Off-
Highway Trucks The power unit can
provide up to 3600psi at 9gpm (248 bar
at 34 lpm).
NOTE:
The hydraulic power unit must
be connected to the truck’s hydraulic
system before engaging the pump
engage switch.
1.2 Features
The main features of the D-60 PortaCo
series power unit are as follows:
Length
191.77 cm
75.5 in
Width
68.58 cm
27 in
Height
106.68 cm
42 in
The power unit is shipped without a
battery. A 12 Volt Battery is required for
starting the diesel engine and operating
the electrical pump controls. A Group 24
Battery is used on the power unit.
The power unit features a Caterpillar
diesel engine and is shipped with a
Caterpillar operator’s manual. See the
engine manual for operating and
maintenance information concerning the
engine.
The engine is equipped with its own 12
Volt DC charging system and will
maintain the charge on the 12 Volt
battery in the power unit.
The power unit comes with a lockable
fuel cap to prevent unauthorized access
and lifting eye bolts so the power unit
can be lifted with a crane hook (Fig
1.2A).
Fig 1.2A
1.3 Options
There are no options at this time.
Consult PortaCo, Inc. at 218-236-0223
for any special requirements.
1.4 Safety Summary
Power unit operators and maintenance
personnel must always comply with the
safety precautions given in this manual
Summary of Contents for D-60S09-F7-S
