Safe Operating Procedure Guide
THIS DOCUMENT IS UNCONTROLLED WHEN PRINTED
Page
9
of
22
Step Instruction
Diagram
7.
Position the boom arm at approximately 45
degrees to the tower.
8.
Align the boom arm billet tabs with the
channels on the shaft.
9.
Once aligned, connect the boom arm to the
tower by pushing firmly forward.
Note:
-
Do not use excessive force.
-
Do not grease or oil the shaft
-
If you are using force to push on you are
doing it incorrectly, stop and start again.
10.
Once connected, manually push the boom
arm clockwise into a vertical position.
