A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Reeaarr SSeeaatt EEnntteerrttaaiinnm
196
Porsche Rear Seat
Entertainment (PRSE)
WARNING
Setting and operating
while driving
Operating and making settings to vehicle compo-
nents while driving could distract you from the
traffic situation. You may lose control of the
vehicle.
e
Only use these components while driving if the
traffic situation allows you to do so safely.
e
If in doubt, stop in a suitable place and perform
complex operations or make settings only
when the vehicle is stationary.
CAUTION
Risk of injury
An unmounted Porsche Rear Seat Entertainment
system can cause injuries during braking, when
changing direction or in the event of an accident.
e
Safely stow away an unmounted PRSE in the
vehicle when driving.
e
Only operate the PRSE in a mounted condition
while driving.
e
Do not use child restraint systems facing back-
ward on a rear seat when a PRSE is mounted.
NOTICE
Risk of damage to the Porsche Rear Seat
Entertainment system if incorrectly handled.
e
When transporting bulky goods, remove the
PRSE and holder and stow safely.
e
Do not use sharp-edged objects to operate the
touch display.
e
Do not tamper with the PRSE electronics or the
relevant software.
e
Do not spray cleaning agents or other liquids
directly onto the touch display.
>
Please see chapter "Cleaning screens and
touch displays" on page 76.
Information
The PRSEis equipped with component protection.
If the PRSE is not mounted in the vehicle within 30
days, then the PRSE will be blocked.
e
To unblock the PRSE, mount the device in the
vehicle.
Fig. 142: Porsche Rear Seat Entertainment
A
Switching on/off
B
Camera
C
Micro-SD card reader
D
Adjust the volume
E
Headphone output
F
Micro-USB port
G
PRSE touch display
Connecting Porsche Rear Seat
Entertainment to the PCM
b
b
WiFi enabled in the PCM.
>
Please see chapter "Activating the PCM WiFi
hotspot (wireless Internet access) " on
page 96.
b
b
WiFi enabled in the PRSE.
b
b
PRSE fastened in the vehicle holder.
Enablement and settings for PCM access
The PCM is used to set those PCM media that the
PRSE is allowed to access.
Touch display in dashboard:
