28
Operating
DANGER
Activating reset to factory settings
If you activate this function, a reset to the factory
settings is possible on the charger itself. If you deac-
tivate this function, a reset to the factory settings can
only take place in the web application.
e
Activate the
Reset to factory settings
function.
g
Refer to the "Reset to factory settings" section
in the Porsche Mobile Charger Plus operating
manual.
XXXLINKXXX Refer to the "Resetting to factory
settings" section on page 6.
Charging
Mains status
The charger automatically detects the information on
the mains status shown here.
Display
Explanation
Mains phases
Number of phases in
the supply cable.
Cable type
Type of vehicle charg-
ing cable. The cable
type provides important
information for setting
the maximum charging
current.
Derating reason
The number
0
indicates
that the charging power
is not restricted.
A number
> 0
indicates
that the charging power
is restricted due to
overheating.
Ground monitoring
Electric shock, short cir-
cuit, fire, explosion
Use of the charger without active ground monitoring
can cause electric shocks, short circuits, fire, explo-
sions or burns.
e
The charger should preferably be operated in
earthed mains supply systems.
e
Only deactivate ground monitoring in non-
earthed mains supply systems.
e
Activate ground monitoring in earthed mains
supply systems.
Ground monitoring can be activated in the web appli-
cation or on the charger. For safety reasons, it can
only be deactivated on the charger.
e
Select the
Activate ground monitoring
function.
g
To activate and deactivate ground monitoring on
the charger, refer to the Porsche Mobile Charger Plus
operating and installation manual.
Setting the electric current and energy manager
Here, you can manually set the charging power to be
used:
–
Reduced power:
The charger charges at 50 % of
the maximum charging current.
–
Full power:
The charger charges at 100 % of the
maximum charging current.
–
Energy manager:
If the charger is connected
to the energy manager, the overload protection
monitors the charging current to the charger.
e
Select the desired function.
Service
Displaying device information
This information is based on the charger data, e.g. the
version number, serial number and host name.
Your Porsche service partner will need this data in
the event of an error message.
Displaying diagnosis
Shows the diagnostic parameters, with information
on the device temperature.
e
Select whether the temperature should be given
in degrees
Celsius
or
Fahrenheit
.
Displaying event memory information
The event memory information shown here relates to
error messages that occurred during the system test.
The active and the passive event memories are dis-
played. Unlike passive events, active events or errors
are currently still persisting.
e
Expand the section to view the event memory.
Resetting to factory settings
If you activate this function, all personal data and
configurations, e.g. charging history and network set-
tings, are deleted. Moreover, all passwords will be
reset to the initial passwords indicated in the letter
containing your access data.
e
Activate the
Reset to factory settings
function.
