26
Operating
Opening the web application
Opening the web application of the charger
b
Charger is connected to the PLC network.
e
Enter the host name of the charger (
<Host-
name>
or
<Hostname>/
) in the browser's ad-
dress bar. The host name is in the letter contain-
ing access data.
– or –
Enter the IP address of the charger in the brows-
er's address bar. The IP address was assigned
by the DHCP server while your device and the
charger were pairing and can be viewed in the
router settings.
Refer to chapter "Connecting the charger to a PLC
g
For information on the web
application, see the instructions
at https://www.porsche.com/international/about-
porsche/e-performance/help-and-contact/
If you require a different language, please select the
appropriate website for your country.
Refer to chapter "Access data" on page 6.
Using the web application
Opening the web application
Opening the web application of the charger
b
Device and charger are in the same network via a
PLC connection.
1.
Open your browser.
2.
Enter the host name of the charger in the brows-
er's address bar. The host name is in the letter
containing access data.
– or –
Enter the IP address of the charger in the brows-
er's address bar. The IP address was assigned
by the DHCP server while your device and the
charger were pairing and can be viewed in the
router settings.
Redirecting to the web application
Information
Depending on which browser you are using, the web
application may not open immediately. Instead, a no-
tice regarding the browser's security settings may be
displayed first.
1.
In the displayed browser warning message, se-
lect
Advanced
.
2.
In the next dialogue box, add the SSL certificate
as an exception.
🡆
The SSL certificate is confirmed and the
Web Application opens.
Connections
Powerline Communication (PLC)
If the charger is connected to a PLC network, net-
work information (e.g. host name, MAC address, IP
address) is displayed here.
Energy manager
For charging control to be assumed by the energy
manager, first the charger (EEBus device) and the
energy manager must be connected to one another.
In open mode, connection with an unknown energy
manager is established on the charger itself and in
the Web Application of the energy manager.
Information
If the charger is in private mode, the connection to
the energy manager must also be confirmed in the
web application of the charger.
g
Refer to the section "Adding an EEBus device"
in the web application instructions of the Porsche
Home Energy Manager.
g
Refer to the Porsche Mobile Charger Plus operating
and installation manual.
Viewing the connection to the energy manager in
the web application:
e
In the Web Application of the charger, navigate
to
Connections
e
Energy manager
.
🡆
The connected energy manager is displayed
with the status
Energy manager connected
.
You can see the device information of the
energy manager.
