Porsche Mobile Charger Plus, Driver Manual

Page: 15 / 43

13
Installing
Installing
Installing the wall mount
Installing the basic wall mount
Fig. 8: Drilling dimensions
1. Mark the drill holes on the wall.
2. Drill the mounting holes and insert wall plugs.
3. Press the basic wall mount 2 (Fig. 8) into the
cable guide 1 (Fig. 8) from the front.
4. Screw the basic wall mount onto the wall.
Installing the connector fastener
Fig. 9: Distance between wall mount and connector fastener
When installing the connector fastener, ensure a dis-
tance of 200 mm from the basic wall mount.
Fig. 10: Drilling dimensions
1. Remove the connector fastener 1 (Fig. 10) from
the cover 2 (Fig. 10).
2. Mark the drill holes on the wall.
3. Drill the mounting holes and insert wall plugs.
4. Screw the connector fastener 1 (Fig. 10) onto
the wall.
5. Fit the cover 2 (Fig. 10) onto the connector fas-
tener 1 (Fig. 10) from below and push up.