10
Overview
Control unit
Fig. 7: Control unit
A
CHARGE STATUS
button with
50 %
and
100 %
indicator lights
B
ENERGY MANAGER
indicator light
C
DOMESTIC CONNECTION
indicator light
D
VEHICLE
indicator light
E
CHARGER
indicator light
F
MULTI-FUNCTION BUTTON
The
CHARGE STATUS
button is used to select be-
tween a charging power of 50 % or 100 %, or to
switch to energy manager mode. If an energy man-
ager is available when in energy manager mode, a
connection to the energy manager is established and
its configured charging power is adopted.
The following device functions can be set using the
MULTI-FUNCTION BUTTON
, partly in combination
with other buttons:
–
Skip reconnection to the energy manager
–
Activate and deactivate ground monitoring
–
Reset to factory settings
–
Reset circuit-breaker error
The
A
and
F
buttons and the
B
–
E
indicator lights
indicate the operating state of the control unit and
possible faults through various colours, lights and
flashing.
Refer to chapter "Malfunctions" on page 29.
