Instrument Panel and Multi-Function Display
93
The tire pressure to be corrected (refill pressure)
is indicated on the displayed wheel.
Example: If
“–1.5 psi (–0.1 bar/ –10 kPa)”
is displayed for the front right tire,
1.5 psi (0.1 bar/ 10 kPa)
must be added to this tire.
The displayed pressures take into account the tire
temperature.
f
Use only the pressure values shown in the
“
Fill info
” display in the “
TPMS
” main menu or
from the corresponding tire pressure warning
when correcting the tire pressure.
Information
After the ignition is switched on, it can take up to
approx. 1 minute until all tire pressures are
displayed. Dashes (-.-) appear instead of the tire
pressures.
Viewing current settings in the
TPMS menu
Selecting comfort/standard pressure
For speeds up to 165 mph (270 km/h), the tire
pressures can be reduced to increase suspension
comfort (function can only be selected in
conjunction with 20-inch wheels/tires).
The Tire Pressure Monitoring System must be set
to the applicable tire pressure (comfort pressure
or standard pressure).
If you select “
Comfort pressure
”, the TPMS
system automatically uses lower pressure values
when monitoring tire pressure.
The comfort tire pressures are included in the
technical data.
or
Under “
Fill info
” in the “
TPMS
” main menu, you
can compare the pressure differences with the
comfort pressures.
If the tires are not yet taught, the new required
pressures are displayed instead of the actual tire
pressures.
For information on teaching tires:
f
Please see the chapter “SYSTEM LEARNING”
on page 95.
1.
Main menu “
TPMS
”
2.
Confirm “
TPMS
”.
1.
Main menu “
TPMS
”
2.
Confirm “
TPMS
”.
3.
Comfort press.
Comfort pressure
is selected.
Comfort press.
Standard pressure
is selected.
Change or select comfort pressure/standard
pressure by enabling or disabling the
“Comfort press.” box.
14_C7NF_21.book Seite 93 Mittwoch, 26. März 2014 12:15 12
