Porsche Cayenne 2020, Owner'S Manual

Page: 253 / 366

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Seats
251
>
Please see chapter "Adjusting headrests on
rear seats" on page 252.
2. Pull up release lever B and fold the seat backrest
forward. The seat backrests must engage audibly
in the lowered position. Adjust the fore-and-aft
position of the seats to do this if necessary.
Returning outer seat backrests to upright
position
WARNING
Backrest not latched in
position
Risk of injury due to backrests that are not properly
engaged.
e When folding back the backrest, check that it is
engaged.
1. Pull up release lever B and fold the seat backrest
back.
2. Make sure that the seat belts are not trapped.
3. Fold up the seat backrest until it locks with an
audible click.
Folding the backrest on the center rear seat
forward
Fig. 189: Folding center rear seat backrest forward
e Press release button C in direction of arrow and
fold the backrest forward.
Returning center rear seat backrest to upright
position
WARNING
Seat backrest not en-
gaged correctly
If the rear seat backrests are not engaged correctly,
they can fold forward unintentionally while driving.
If the red marking
B is still visible, the seat backrest
is not engaged correctly.
e Make sure that the red marking B is no longer
visible after the seat backrest has engaged.
e Release the seat backrest again and engage it
again if necessary.
e
Fold up the seat backrest until it locks with an
audible click.
Make sure that the seat belts are not trapped.
Adjusting headrests on front seats
The height and fore-and-aft position of the headr-
ests on the front seats can be adjusted.
Fig. 190: Adjusting height and fore-and-aft position of
headrests on front seats
e
Adjust the height of the relevant headrest so that
the upper edge of the headrest is at least at eye
level or higher.
e Always make sure that the relevant headrest is
engaged correctly.
Raising
e Push headrest upward until the desired setting is
reached.
Lowering
e Press button A and at the same time push the
headrest downward until the desired setting is
reached.