Porsche 911 GT3 RS, Owner'S Manual

Page: 23 / 27

23
CALIBRATION
If the 6-speed gear stick (7GS) is not working
properly it might require new calibration.
Please go through the following steps:
`
Connect the power supply to the base
`
Press „start button“ + „TUNING button“
at the same time
The LED display will show G_n
`
Bring the 7GS into neutral position
`
Press the „start button“
The display will now change to G_r
`
Enter reverse gear
`
Press the „start button“
The display will now change to G_1
`
Bring the 7GS into 1
st
gear
`
Press the „start button“
The display will now change to G_2
`
Bring the 7GS into 2
nd
gear
`
Press the „start button“
The display will now change to G_3
`
Bring the 7GS into 3
rd
gear
`
Press the „start button“
The display will now change to G_4
`
Bring the 7GS into 4
th
gear
`
Press the „start button“
The display will now change to G_5
`
Bring the 7GS into 5
th
gear
`
Press the „start button“
The display will now change to G_6
`
Bring the 7GS into 6
th
gear
`
Press the „start button“
Calibration is completed
WHEEL CENTER CALIBRATION
If you drive straight and the wheel is slightly off-center,
you can recalibrate the wheel.
Move the wheel rim to the middle position.
Press the Start D-pad LEFT button at the
same time and hold both buttons.
Now also press the base button.
Release all three buttons. •
•
•
•