Porsche 911 2020, Owner'S Manual

Page: 188 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Personal Settings
186
Personal Settings
Ergonomic settings can be stored and retrieved
manually using the memory buttons in the driver's
door. In addition, individual driver profiles can be
created via the PCM that automatically store and
retrieve ergonomic and comfort settings. Both
functions can be used independently of one another.
Storing and retrieving personal
settings
If the ignition is switched off, the previously actu-
ated settings are automatically stored in the se-
lected driver profile by the PCM and linked to the
vehicle key used. The settings are automatically re-
trieved via the vehicle key when the door is unlocked.
If two or more people use the vehicle, it is advanta-
geous to use one driver profile and vehicle key per
person. The driver profiles can be changed manually
if required.
Additionally, up to three ergonomic settings can be
manually stored and retrieved via the memory but-
tons in the driver's door.
Ergonomic settings affect:
seat, door mirror and steering wheel settings.
Additionally, up to three ergonomic settings can be
manually stored and retrieved via the memory but-
tons in the driver's door.
Comfort settings affect:
Ergonomic, air conditioning, light, vision, assistance-
system, instrument cluster and infotainment
settings.
Information
Individual functions cannot be personalized, to avoid
damage to the vehicle (e.g. the function for auto-
matically activating the rear wiper when reverse gear
is engaged).
CAUTION
Retrieving the automatic
seat, door mirror, and
steering wheel settings
Parts of the body may be pinched or crushed if the
settings are activated in an uncontrolled manner.
e
Do not leave children in the vehicle unattended.
e
Automatic retrieval of the ergonomic settings
can be cancelled if necessary by pressing a
memory button or a seat adjustment button.
Storing and retrieving comfort
settings
Storing comfort settings
e When the ignition is switched off, the settings
previously made are automatically saved to the
driver profile in the PCM.
Retrieving comfort settings
1. Unlock the vehicle.
The driver profile settings are retrieved.
– or –
b b Vehicle is stationary.
1. Changing driver profile using the PCM.
2. Wait until all settings have been applied.
If loading of the settings is interrupted:
e
Select Activate driver via the PCM.
Managing driver profile
Up to 6 driver profiles and 1 guest profile can be
created and managed.
When you start the PCM for the first time, the Set-
up wizard is displayed and guides you through im-
portant steps for configuring the PCM. We recom-
mend that you run the Set-up wizard fully to
correctly create the first driver profile.
It is only possible to switch between the created
driver profiles via the instrument cluster immediately
after the ignition has been switched on and, when
the ignition is on, at any time via the PCM.
Driver detection occurs automatically via the vehicle
key. A vehicle key is always automatically assigned
to an active profile.
Managing driver profiles
Driver profiles can be managed in the PCM.
e
SET
e
Driver
– Add driver
– Edit driver
– Change driver
– Delete driver (via the Edit driver menu item)
– Activate driver
– Activate personalization
– Deactivate automatic saving
If the activated personalization settings do not
match the current driver, it is recommended to
switch to another created driver profile. If necessary,
a new driver profile can be created and the vehicle
settings can then be adapted. This prevents the ve-
hicle settings of the driver profile first selected from
being inadvertently changed.