Porsche 911 2020, Owner'S Manual

Page: 113 / 360

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Device Manager
111
Device Manager
Opening the Device Manager
The Device Manager provides an overview of the
available devices and of their connection status.
e Select or in the header (depending on
the connection status).
Displaying connection status
Colors and meanings of the symbols
– Green symbol: Connection is active.
– White symbol: Connection is possible, not yet
active.
– No symbol: Connection is not possible.
Available functions
– Phone : Cellphones connected via Bluetooth
®
.
Please see chapter "Phone" on page 188.
– Music : External media sources connected via
Bluetooth
®
. Please see chapter "Media" on
page 168.
– Data : Data connection is established via the
SIM card. Please see chapter "Porsche Connect"
on page 204.
– App : Porsche Connect App connected via
WiFi. Please see chapter "Apps" on page 64.
For further information on the Porsche Connect
App: visit www.porsche.com/connect.
– Link : iPhone with access to Apple® CarPlay
connected via USB connection. Please see
chapter "Apple® CarPlay" on page 62.
– ParkPilot : Cellphone connected for remote
parking. Please see chapter "Remote parking" on
page 39.
Pairing a new device via
Bluetooth
®
1. Select or in the header (depending on
the connection status) e Search for new
device .
2. Select the device from the list.
A 6-digit Bluetooth
®
code is generated and dis-
played in the PCM and on the device.
3. Compare the Bluetooth
®
code in the PCM and
on the device.
4. If the Bluetooth
®
code in the PCM and on the
device match, confirm.
If the cellphone has been successfully paired, it
will appear in the list of devices.
For information on operating the Porsche
Communication Management system (PCM):
> Please see chapter "Porsche Communication
Management (PCM)" on page 197.
Device Manager settings
e
Select or in the header (depending on
the connection status) e Options .
– Telephone : Please see chapter "Phone" on
page 188.
– Bluetooth :
– Switch Bluetooth on or off.
– Permit Access to SIM card .
– Adapt Bluetooth name of the PCM.
– WiFi :
– Switch WiFi on or off.
– Configure WiFi Hotspot in PCM : Display and
set up the PCM WiFi access data. This data is
required to be able to connect a device (e.g.
cellphone) to the PCM via WiFi and to use a
WiFi hotspot.
– Connected WiFi devices : List of all WiFi de-
vices which have been registered.
– Search for WiFi hotspot : Search for new WiFi
hotspot and enter the access data for the
external WiFi hotspot (user name and pass-
word). Be aware of upper and lower case
when entering the data.
– Mobile data :
– Switch Mobile data on or off.
– Share data connection : Enable data connec-
tion for WiFi devices.
– Roaming : Allow or block data connections in
external networks.
– Vehicle hotspot : Display PCM WiFi access data.
– Delete paired devices