Populas VOX 6030 Assembly Instructions Download Page 3

Page: 3 / 3

STEP 4: FEET ATTACHMENT

Position Feet ( B) over the bottom of Telescoping Leg (A)

and align mounting holes. Attach using four M8 Fasteners

(H) but do not completely tighten. The mounting plate on

the Telescoping Leg (A) will swivel allowing the foot to be

aligned properly. Securely holding the foot in the proper

alignment with the Table Top (A), fully tighten the

fasteners. Attach four Levelers (N) or optional casters.

STEP 5: OPERATION AND USE

Gently turn table over and adjust Levelers (N) if required. Table

adjusts up and down using the Control Switch (E). Clean with

soft cloth and mild cleaners suitable for furniture.

Summary of Contents for VOX 6030

Page 1: ...elescoping Legs B 2 Feet C 2 Support Brace 1 Controller 1 Control Switch 1 Hardware bag TABLE PACKAGE H 1 Table Top TOOLS NEEDED Phillips Screwdriver INFINITY WORKSTATIONS DESKS AND TABLES WITH POWERE...

Page 2: ...ort Brace C to Table Top G with four 10 x 1 Fasteners J Position Controller D and Control Switch E as shown on Table Top G Align with pre drilled holes and attach Control Switch C to table top as show...

Page 3: ...g Leg A will swivel allowing the foot to be aligned properly Securely holding the foot in the proper alignment with the Table Top A fully tighten the fasteners Attach four Levelers N or optional caste...