Insert hexagonal shafts fully into legs
(front and rear).
Slide washer flush to connector tube and
center tube between legs.
STEP SIX
Attach mounting plates to tabletops using
#10 x 1" screws.
Attach Keyboard Surface-Lift using
#10 x 1" screws as shown.
STEP SEVEN
Gently turn table over and adjust levelers if required.
Insert the top crank handle through the rear table top directly into the crank tube. Keyboard surface lift raises and lowers
with front lever. Tilt adjustment is made with a knob.
Clean with soft cloth and mild cleaners suitable for furniture.
D
E
F
Leg A
Leg B
#10 x 1" Screw (x4)
#10 x 1" Screw (x3)
Detail: E
Detail: F
#10 x 1" Screw (x6)
#10 x 1" Screws (x6)
Detail : D
