4. Getting Started Guide
•
Carefully unpack amplifier
•
Observing correct polarity, attach left and right speakers to the left and right speaker terminals. The use
of banana plugs (not supplied) is highly recommended and makes hooking up speakers very easy.
•
Plug audio source into the left and right RCA sockets (don’t switch on audio source yet)
•
Plug the supplied 12v power supply into the 12v DC power socket on the rear of amp (do not turn mains
power on just yet)
•
Make sure that the volume control is turned down fully.
•
Power up the 12v power supply and using the switch power switch on the amplifier back panel, turn on
the amplifier. The blue power LED on front of amplifier should light up.
•
Play audio source
•
Turn up volume to suitable level
•
Enjoy!
5. Accessories
Comes complete with:
•
12v switched mode power supply
•
UK IEC mains power lead
•
Spare DC power lead (could be used to attach to a 12v battery or better quality PSU
•
User Guide
•
A set of 4 stick on rubber feet
6. Specifications
T-Amp IC
Tripath 2024
Output Power
2x15W @ 4 Ohm
2x10W @ 8 Ohm
Signal-to-Noise Ratio (SNR)
98dB
IHF IM Distortion
0.10% @ 1W, 4Ohm
THD+Noise
Audiophile Quality
0.03% @ 9W 4 Ohm
0.1% @ 11W 4 Ohm
0.1% @ 6W 8 Ohm
High Power
10% @ 10W 8 Ohm
Power Efficiency
81% @ 15W 4 Ohm
90% @ 10W 8 Ohm
Input
RCA inputs (Left/Right)
Power Socket (5.5mm/2.1mm)
Output
Left and Right full size speaker terminals (also takes banana plugs)
Switches & Knobs
Power ON/OFF switch (on rear panel)
Blue LED power indicator
Volume Knob
Power Supply
DC 12V-13.2V (max.)
Dimensions
(W)76mm x (H)46mm x (D)114mm[case only]/150mm [incl.
sockets & knob]
Weight
500 Grams?
