UK
Please read this manual carefully before using the DIN rail power supply.
ATTENTION
: Failure to comply with the safety instructions and the instructions for use listed here may result in serious accidents,
personal injury and material damage.
Includes
DIN rail power supply slim, additional sheet linked with the manual
Specifications
Safety instructions
•
WARNING: Danger! All installation steps described here may only be carried out by experienced specialists who are trained and
experienced in the installation as well as commissioning and maintenance of DIN rail power supplies combined with electrome-
chanical components. The same applies to 230 V mains by qualified electricians.
•
WARNING: Electric shock hazard! Incorrect modifications to the Poppstar DIN rail power supply may result in 230 V AC voltage
being applied to other components.
•
WARNING: Short circuit hazard! Never insert objects into ventilation slots or sockets.
•
WARNING: Fire hazard! Selecting a higher operating voltage than specified by the manufacturer of the product can cause serious
damage to the DIN rail power supply and the electronic devices connected to it!
•
For any work carried out on the 230 V AC mains, the current VDE regulations as well as corresponding country-specific regulati-
ons must be respected.
•
Incorrect wiring of the DIN rail power supply can lead to destruction of the electronics.
•
Keep the product out of reach of children.
•
Contains small parts that can be swallowed. Keep away from small children!
•
Never open the housing.
•
Never cover the product.
•
Never expose the product to extreme circumstances such as heat, cold, wet, or humid environments, foreign matters
(e. g. chippings or liquids), direct sunlight, vibrations, shocks or mechanical pressure.
•
Do not modify or dismantle the product or accessories.
•
Never repair broken products yourself. Please contact our technical support.
•
Only use the product in dry indoor areas.
Model
1010425
1010426
1010427
1010428
1010429
1010430
Input
100 - 240V AC, 50/60 Hz
Output
5V 2A 10W
12V 1,25A 15W
12V 2,5A 30W
24V 2,5A 60W
12V 4,5A 54W
12V 7,5A 90W
Adjustable output
voltage
4V - 6V
11V - 13V
11,4V - 12,6V
22,8V - 25,2V
11,4V - 12,6V
11V - 13V
Relative humidity
Operating: 20 - 90 % (non-condensing)
Storage: 10 - 95 %
Temperature
Operating: -20 to +50°C
Storage: -40 to +80°C
Appliance class
II
IP code
IP 20
Primary cable
Secondary cable
12 AWG - 18 AWG (3,3mm² - 0,8mm²)
Heat-resistant up to min. 80 °C (e. g. UL1007)
Dimensions (mm)
18 x 90 x 58
18 x 90 x 58
78 x 92 x 61
52,5 x 90 x 58
52,5 x 90 x 58
70 x 90 x 58
Weight (g)
72
74
234
188
186
246
For installation on
DIN rail of type TS 35/7.5 or TS 35/15 (or similar)
