Maintenance
16
Emissions Maintenance Schedule
Maintenance, replacement or repair of the emission control device and systems may be
performed by any Authorised Toro or Pope Service Dealer.
Before performing any maintenance on this machine, stop the engine and disconnect
the spark plug.
WARNING:
CLEANING THE PRODUCT:
■
Stop the product before cleaning.
■
Clean the exterior of the product with a damp cloth.
■
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use.
NOTE:
Depending on the type of fuel used, the type and amount of oil used, and/or your operating
conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice a
power loss with your petrol powered tool, you may need to remove these deposits to restore
performance. We highly recommend that only qualified service technicians perform this service.
Emission Part
Fuel Tank Assembly
(includes Fuel Lines, Fuel
Cap and Fuel Filter)
X
X
X
X
X
Clean Air Filter
Clean Spark Arrester
Replace Spark Plug
Inspect before
each use
Every 10 hours
Every 10 - 15
hours or yearly
Every 50 hours
Summary of Contents for 101PB26
Page 2: ......