MAINTENANCE
9
Follow these general maintenance guidelines before each use.
•
Check that all nuts, bolts and screws are securely tightened in order to be sure that the
machine is in a safe working condition.
•
Only use replacement cutters of the correct type.
•
For your own safety, replace worn or damaged parts without delay.
Cleaning
IMPORTANT!
All maintenance, service and cleaning work must be performed after the power
cord has been disconnected from the socket.
•
Do not use high-pressure cleaners or running water to clean the tool.
•
Do not use any aggressive cleaning agents.
•
Always keep the tool and ventilation slats clean.
•
Use a damp rag to wipe dirt marks off of the tool. Clean the blower tube with a brush upon
evidence of dirt and grime.
•
Dirt and grime can make the switch more difficult to operate as a result of the material that
swirls up off the ground. When this occurs, simply flip the switch back and forth a few times,
which should bring it back to normal.
Storage
Electric tools should be kept in a dry place when not in use.