28
Inactive Standby
The radio is set default to turn off automatically after 120 minutes without any
manual operation of the radio.To deactivate Inactive standby or to change the Timeout
period:
1. In any mode, press “MENU → System settings →Inactive Standby” on the remote
control.
Press “TUNE▲/▼” to c
hoose your preferred setting (Off/2/4/5/6 Hours)and press the
“select” button to confirm.
2. In any mode, long-press the Tuning/select button
→ System settings →Inactive Standby
Access Inactive standby settings by pressing the Tuning/select button/knob when
<Inactivestandby> is shown in the display. Turn the Tuning/select button/knob until you
reach your desired setting. Press the Tuning/select button/knob to confirm your choice.
(Default value 2 hours).
Set language
1.
In any mode, press “MENU → System settings →Language” on the remote control.
2.
Press “TUNE▲/▼”to select the desired language type
(English/Danish/Dutch/Finnish/French/German/Italian/Norwegian/Polish/Portugese/Spa
nishSwedish/Turkish, press “select” button to confirm. The default language is English
Factory reset
●
NOTE:
Doing this will delete all the preset stations, alarms and time settings, and return
the radio to its original factory settings.
In any mode, press “MENU → System settings →Factory Reset” on the remote control to
pop up the dialogue box, asking for confirmation whether to restore the factory settings
(No/Yes); press “select” button to confirm.
Software update
From time to time, POP World Radio may make software upgrades available with bug fixes
and/or additional features. You can either check manually, or set POP World Radio to check
periodically automatically (this is the default). If PoP World Radio detects that newer
software is available, it asks if you want to go ahead with an update. If you agree, the new
software is then downloaded and installed. After a software upgrade, all user settings are
maintained.
●
CAUTION:
Before starting a software upgrade, ensure that POP World Radio is plugged
into a stable mains power connection. Disconnecting power during a software
update may permanently damage the unit.
●
NOTE:
To turn automatic checking on or off, select Menu > System settings > Software
update > Auto-check setting.
