POP-A-SHOT ENTERPRISE LLC
200 NORTH 3RD STREET, SALINA, KS 67401
Email: [email protected]
Steps (Continued):
• Using zip ties through the grommets, attach the ramp to the front
lower cross bar of the two (2) cross bars, leaving slack in the zip
ties for adjustments.
• Pull front ramp flap over the top cross bar and then under the
lower cross bar, attach to the velcro underneath the ramp.
Now attach the sides of the ramp to the top support bars and
along the back uprights and front uprights of the game.
Make sure all the velcro straps are in place.
• Back of ramp: Attach 5 grommets to Bottom Cross bar. Attach 4
grommets to the Top Cross Bar.
• The optional telescoping legs maybe released by removing the
positioning bolts from the frame. Lift the front end first to let the
legs drop far enough to reinsert the positioning bolts into the
predrilled holes in the legs and the frame.
Then tighten 5” bolt. Repeat this step for the back of the game
• Insert the sensor wire from the collar to the back of the electronic
scoreboard (see page 5) as follows: Top-Brown, Middle-Black,
and Bottom-Blue.
• Insert the AC adapter cord into the back of the electronic
scoreboard. Plug into power outlet.
Warranty information: Lifetime on all electronic components.
POP-A-SHOT
®
PREMIER
Page 4
Summary of Contents for PREMIER STEEL
Page 1: ......
