-8-
Disassembly
Dismantle
Install
If you want to remove the parrot mouth accessory, please take it down
according to the figure.
If you want to a�ach the parrot mouth accessory, use the magnet to adsorb
the parrot mouth.
Safety
Ba�ery overhea�ng
Ba�ery management and cau�ons
When the charge is completed, please unplug the charging line.
To avoid fire, do not charge at high temperatures(e.g. swea�ng rooms,
bonfire accessories, etc.).
Charger a�en�on
Print head management and cau�ons
There may be damage to the print head due to improper charging.
We recommend not to use Poooli L2 in high humidity or dusty areas.
Combus�on hazard
Print head overhea�ng
A�er prin�ng, do not touch the print head directly to prevent burn.
Charging port damage phenomenon
Charging cau�ons
Please gently insert or unplug the chargingline to prevent excessive
damage to the charging port.
-11-
-12-
-13-
-7-
APP Se�ng
You can view informa�on such as remaining power, firmware versions in
device management.
Double click the power bu�on
Print QR code
Double click the power bu�on to print the QR code.
Add the Scanning func�on by APP, then connect the device by scanning
QR code.
Simple opera�on
APP se�ng
When the first connec�on succeeds, the next �me you star�he applica�on
that will connect automa�cally.
In the connec�on state, double click the power bu�on to disconnect the
connec�on.
Bluetooth 4.0
Bluetooth pairing
Replace Supplies
FCC
FCC
-9-
When changing supplies , do not touch the print head in case of ovwehea�ng.
！
Place Poooli as shown in figure 1, and look at the arrow.
With reference to figure 2, push down the upper cover.
When replacing supplies, place the supplies in reference to the direc�on
shown in figure 3.
If the supplies are properly placed, close the upper cover to the lower
cover and push the upper cover back to its original shape.
Figure 1
Figure 2
Figure 3
Place direc�on
-10-
Offical Supplies Types
*
*
Thermal paper of Poooli L2 is a special piece of paper.
If the machine failure caused by the use of other paper, you will
not be able to get the three guarantees.
No bisphenol-A, saves photo for up to 22 years.
Three proofings
Thermal paper
Waterproof, oil-proof, an�-PVC, no bisphenol
-A, saves photo for up to 22 years.
Self-adhesive
paper
No bisphenol-A, with a s�cky glue, no fixed
specifica�ons, free to set the print length
Convenience
s�cker
No bisphenol-A, hasback glue, can be picked
as soon as affixed.
Con�nuous
paper
No bisphenol-A, has more s�cky glue, does not
have the fixed specifica�on, can be used as a
variety of tag iden�fica�on
This device complies with part 15 of the FCC Rules. Opera�on is subject
to the following two condi�ons: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired opera�on.
Any changes or modifica�ons not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protec�on against
harmful interference in a residen�al installa�on. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruc�ons, may cause
harmful interference to radio communica�ons.
However, there is no guarantee that interference will not occur in a
par�cular installa�on. If this equipment does cause harmful interference
to radio or television recep�on, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separa�on between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This
equipment should be installed and operated with minimum distance
between 20cm the radiator your body: Use only the supplied antenna.
FCC ID:
2AUJS-L2
