17
5.3
Custom Schedules and Quick Clean
To customize the run schedule for your Variable Speed Pump, the pump must be
stopped. Be sure that the Start/Stop button LED is not illuminated.
Programming a Custom Schedule:
NOTE: When programming, the LED light next to the parameter (
“Speed”
,
“Time”
and
“Duration”
) you are setting will blink.
1.Stop the pump if it is running by pressing the
Start/Stop
button.
2.Press the
“1”
button. The LED above the selected SPEED will begin to blink and the
“Speed”
parameter LED will blink while editing. See
Figure 7
.
Figure 7: Setting Speed
3.Use the
“+”
and
“-”
arrows to adjust the speed in RPM for SPEED 1.
NOTE: Speed is adjusted up or down by increments of 10 RPM.
4.Press the
“1”
button again and the display will change to SPEED 1 start time. The
“Time”
parameter LED will begin to blink. See
Figure 8.
Figure 8: Setting Start Time
5. OPERATING THE PUMP