22
4. Use
4.9 Activation / deactivation of On / Off groups
4.10 Main parameters
Groups can be activated / deactivated at any time. The
setting is as follows:
Step 1 :
Go to the main menu by unlocking the
control panel.
Step 2 :
Press the button for 5 seconds to enter
the setting of the On / off groups.
Step 3 :
Set the same time for switching on (ON)
and switching off (OFF) to deactivate the selected
group.
Step 4 :
Press the button
to confirm the settings
and return to the main menu.
ECO
IN
OUT
SET
h
1
ON
OFF
2
3
min
°C
%
A
h
min
°C
%
A
ECO
IN
OUT
SET
h
1
ON
OFF
2
3
min
°C
%
A
h
min
°C
%
A
System settings can be checked and changed using the remote control by following the steps below
WARNING
:
This operation is used to facilitate maintenance and future repairs.
Only an experienced professional is authorized to modify the default parameters
Step 1 :
Press the button
once to enter the general
parameters of the heat pump.
The icon
ECO
IN
OUT
SET
h
1
ON
OFF
2
3
min
°C
%
A
h
min
°C
%
A
is displayed.
Step 2 :
Scroll through the main parameter codes using
the and buttons
and
and confirm by pressing
.
Step 3 :
To modify the selected parameter, use the but-
tons
and
then confirm by pressing
.
Step 4 :
Press the button
to return to the main menu.
