Troubleshooting:
Disassemble or replace the wheels / tracks
1
2
3
4
Cleaner doesn’t move or moves too slow
Check wheel RPM. Please refer to " adjusting the cleaner " in the user
manual .
There is blockage inside the cleaner product, remove the internal blockage.
The water pump is off or running slowly. Restart or replace the water pump.
Check whether there is air in the pump circulating system. If the water level
in the water pump basket drops, or too many bubbles are seen in the pump
basket, or air is emitted from the return pipe, there is air in the circulation.
Check the hoses connections and tighten all connections on the pump.
And check whether the O-ring on the water pump basket is worn.
Filter for backwash filter unit and water pump.
The internal turbine blades of the cleaner are installed incorrectly. Refer to
" Turbine blade replacement" in the user manual.
Internal drive mechanism blockage. Refer to " Remove Debris" in the user
manual .
The track is too loose. It falls off the wheel. Track replacement.
There are other obstacles to the cleaner itself. Please contact your local
dealer.
7
If you have problems with your cleaner, follow the troubleshooting steps below to restore performance.
Note:
turn off the filter pump before making any repairs.
Problem
Solution
