Adjusting the Set Temperature
When using a panel with Up and Down buttons (Temperature buttons), pressing Up or Down will cause the temperature to
flash. Pressing a temperature button again will adjust the set temperature in the direction indicated on the button. When
the LCD stops flashing, the spa will heat to the new set temperature when required.
Press-and-Hold
If a Temperature button is pressed and held when the temperature is flashing, the temperature will continue to change
until the button is released.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High Range designated
in the display by an “up” arrow, and the Low Range designated in the display by a “down” arrow.
These ranges can be used for various reasons, with a common use being a “ready to use” setting vs. a “vacation” setting.
The Ranges are chosen using the menu structure below. Each range maintains its own set temperature as programmed by
the user. This way, when a range is chosen, the spa will heat to the set temperature associated with that range.
For example:
High Range might be set between 80°F and 104°F.
Low Range might be set between 50°F and 99°F.
More specific Temp Ranges may be determined by the Manufacturer.
Freeze Protection is active in either range.
See Ready and Rest on Page 6
Temperature and Temp Range
04-11-09
Sub-Menu Detail – Set Temperature and Water Temperature Ranges
High Range via Low Range
Temperature Selection
Press the Temperature button
repeatedly to change the
temperature.
By pressing and holding the Temperature button, the temperature will change.
By pressing and holding the Temperature button, the temperature will change.
SET
RANGE
SET
RANGE
Set temperature will be
displayed and flash
SET
RANGE FLTR1
SET
RANGE FLTR1
SET
RANGE FLTR1
SET
RANGE
SET
RANGE
Waiting for several seconds will return to the initial setting.
Move the Beach arrows in the LCD
Set
*****
SET
RANGE
While the temperature
is flashing ...
To the next item in the main menu
Screen
READY
RANGE FLTR1
Screen
READY
RANGE FLTR1
Several seconds
Screen
READY
RANGE FLTR1
Press the Temperature button
repeatedly to change the temperature.
Several seconds
Screen
READY
RANGE FLTR1
Screen
READY
RANGE FLTR1
for additional heating control information.
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button(WARM (Up) and COOL (Down) buttons), used for “Action” .
Light or dedicated “Choose” button, depending on control panel configuration
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and ignores
any change to that menu item.
*****
10
