L0311 Rev 3 6-21
© Latham Pool Products, Inc. 2021. All rights reserved.
Page 1 of 9
Touch Screen Pool Cover Controller Wiring and
Installation Instructions
Table of Contents
Important Safety Instructions .................................................................................................................... 1
Installation Notes ....................................................................................................................................... 1
Product Summary ...................................................................................................................................... 2
Mounting Instructions ................................................................................................................................ 2
Wiring Description ..................................................................................................................................... 3
Standard Setup Procedure ......................................................................................................................... 4
Accessing the Setup Menu .................................................................................................................. 4
Set a Primary Controller ...................................................................................................................... 4
Configure Devices ............................................................................................................................... 4
Verify Connections and Lock Network ................................................................................................ 5
Assign Main Device ............................................................................................................................. 5
Calibrate each device .......................................................................................................................... 5
Set Passwords ..................................................................................................................................... 5
Edit Service Screen .............................................................................................................................. 5
User Settings ....................................................................................................................................... 6
Wi-Fi Setup .......................................................................................................................................... 6
Menu Structure .......................................................................................................................................... 7
Mesh Configuration Options
...........................................................................................................
9
WARNING! IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
Warning: To avoid fire or electrocution.
Identify GFCI breaker at distribution panel and turn off power before attempting to service or install equipment.
Only install the touch controller to a single gang box rated for outdoor use.
Make motor connections in an all-weather junction box as high as possible in the cover box.
Install this device in accordance with national and local electrical codes (NEC 680-26).
Electrical wiring and service work should only be performed by a qualified individual.
Warning: To avoid injury or drowning.
The control switch must be mounted in a fixed location where 100% of the pool surface is visible.
Installation Notes
Use water tight connections at all wire junction locations.
Install device in location where exposure to sun and water sources
(e.g. sprinklers, water downspouts) are limited.
Make sure all gaskets are undamaged and are clean and free of dirt and debris.
To reverse motor spin directions, see the “Configure Devices” section in “Standard Setup Procedure.”
The power circuit should be sized for 15 amps and must be sized accordingly.
Perform a pool calibration on touch pad after installation for accurate current limits and operational cycle counts.
Wi-Fi features require a Wi-Fi network to be present and associated to the device to receive alerts.
Keep remote devices in line of sight of controlling devices for best performance.
⚠