CONTENTS:
PART A:
ASSEMBLING THE ACROBAT GT POOL CLEANER
PART B:
INSTALLING THE ACROBAT GT POOL CLEANER
PART C:
INSTALLING OR REPLACING THE DIAPHRAGM
PART D:
MAINTENANCE
PART E:
TROUBLESHOOTING
PART F:
LIST OF INSTALLATION COMPONENTS
PART G:
WARRANTY
PART A:
ASSEMBLING THE ACROBAT GT POOL CLEANER
1. Place the inner lip of the disc onto the fl exi foot pad fl ange and peel over until disc is secure
between the fl ange and lip of the fl exi foot pad.
2. The fi ns of the disc and the word “TOP” should face the fl oat arm.
3. Unscrew the threaded hand-nut and slide the bumper ring over the back of the ACROBAT GT’s
main body.
4. Screw the hand-nut back into place and this will secure the bumper ring in place.
5. Attach the hoses to thick tube of main body at the opposite end to the hand nut, push hose
on fi rmly.
PART B:
INSTALLING THE ACROBAT GT POOL CLEANER
1.
Connect ACROBAT GT machine to your hoses, suffi cient hose should be installed for the hose to
reach the furthest place from the skimmer box plus one length of hose.
2.
Gently place machine in water. This will let the unit gradually release air and sink to pool fl oor.
3.
Prime your hose by placing the last section of hose over your return inlet eyeball while your
pump is running. This fi lls the hoses and ACROBAT GT unit with water and allows it to sink.
4.
Attach the adjustable control valve to the end hose, with arrow in direction of water fl ow. Use
weir adapter in skimmer plate and attach elbow supplied between adapter and control valve.
5.
Attach the free end of the pool hose to the free end of the adjustable valve.
Switch on the pump and the ACROBAT GT will start to operate.
6.
If required, adjust the control valve by opening or closing the fl ow - the tighter the spring, the
more pressure, the looser the spring, the less pressure.
WARNING! DO NOT DETACH POOL CLEANER WHILE PUMP IS RUNNING
TIP:
Backwash and rinse fi lter and clear skimmer box and pump basket before operating your new
ACROBAT GT pool cleaner.
TIP:
Backwashing and cleaning the skimmer basket or sock and pump basket should be done weekly.
ACROBAT GT
ACROBAT GT
Pool Cleaner
Pool Cleaner
ACROBAT GT
ACROBAT GT
Pool Cleaner
Pool Cleaner
PART F:
LIST OF COMPONENTS:
PART NUMBER DESCRIPTION
PURPOSE
WZ5
Skimmer 45 degree elbow To assist with fi tting of control valve or hose into
the weir adaptor.
WZ6
Finned weir adaptor
To assist with fi tting of hose into a vacuum plate
in the skimmer box.
WZ8
T-shaped regulator /
control valve
Adjusts fl ow to cleaner, Suitable for most types
of cleaner.
WZ9
Skimmer 90 degree elbow To assist with fi tting of control valve into weir
adaptor.
WZ28 / AMPB1
1m hose x 12pces
Suitable for most types of cleaner.
WZ29
Hose weight
Prevent coiling hose. Keep hose balanced.
WZ30
Acrobat Flow Valve
Adjusts fl ow to cleaner, Suitable for most types
of cleaner.
K167-08
Eyeball diverter ball
(not shown here)
To defl ect the fl ow of water returning to the
pool so the current does not control the cleaner.
Acrobat Float Arm Assembly
WZ26
Acrobat Main Body Weight
WZ25
Acrobat Main Body Section
WZ24
Acrobat Lower Diaphragm
Fitting Seal
WZ27
Acrobat Round or
Cassette Diaphragm
WZ4
Acrobat Outer Tube
WZ22
Acrobat Deflector
Ring
WZ23
Acrobat Inner Tube
WZ21
Acrobat Flexi Foot
WZ2
Acrobat Deep Vee 36
Finned Disk
WZ1
