Pontiac AZTEK 2003, Owner'S Manual

Page: 114 / 428

To adjust the crossrail(s), the sunroof stop (A) must be
removed.
To remove the sunroof stop, do the following:
1. Find the tool (B) located in a bag in the glovebox
labeled “tool kit-acsry.”
2. Use the tool to remove the screw located in the
side rail assembly in front of the front crossrail.
3. Repeat for the other side.
4. Put the tool and the screws back in the plastic bag
in the glove box.
To adjust the crossrails, lift the release levers on each
side to unlock them. Slide the crossrails forward or
backward, as needed, to accommodate loads of
various sizes.
After repositioning the crossrails, engage the release
lever. This will lock the crossrails in place.
Notice: Do not open the sunroof if the crossrails
are not in the full rear position. This could cause
damage to the sunroof glass panel and/or the
crossrails.
Use the four tie-down
loops in each of the
side rails to help
secure large loads.
When you are done using the crossrails you must
replace the sunroof stop.
2-38