17
To slide the seat forward or rearward:
1. Lift the release bar located under the
front of the seat cushion to unlock the
seat.
2. Slide the seat to the desired position;
then release the bar.
3. Try to move the seat forward and
backward to ensure it is locked
in place.
See Section 1 of your Owner Manual.
This feature serves as an adjustable
cargo panel or as a security cover when
placed in the upper level position.
The cargo panel is carpeted on one side
and has a recessed plastic surface on
the other — a convenient feature when
carrying wet or dirty cargo. The panel
includes four hooks for securing grocery
bags and has a swing-down leg that
allows the panel to be used as a table.
Four Cargo Panel Positions
The cargo panel can be placed in one of
four positions: Upper, Center, Lower and
a Table position.
Multifunction Cargo Panel/
Security Cover (if equipped)
To place the panel in the upper,
center or lower position:
1. Insert the panel’s rubber knobs into
either the upper, center or lower
guides and slide the panel forward.
2. Press down on the back of the panel
to lock it in place.
To set up the table:
1. Insert the panel’s rubber knobs into
the rear of the upper guides.
2. Tilt the panel upward.
3. Release the table leg from the panel;
then rotate the leg outward.
4. While lowering the panel, guide the
leg onto the striker plate located on
the lower trim molding of the vehicle.
5. Be sure that the leg is secure.
See Section 2 of your Owner Manual.
Note:
The table can only be used in the
upper level position. The table can hold
a maximum of 100 pounds. Placing hot
items on the table surface could dam-
age it. Be sure items placed on the
table are of moderate temperature.
Always have the panel in the stored
position when you are driving; other-
wise, vehicle damage may occur.
