- EN -
9
Scope of delivery
Delivery
A
Quantity
Description
1
6
LED spot including bulb
2
1
Transformer
Installation and connection
B, C
Ensure that units are positioned and secured such that they cannot present a hazard:
•
Install the transformer at a minimum safety distance of 2 m from the water.
•
Position the lights outside of the water or in the water and tilt the light head as desired.
How to proceed:
1. Connect the plug of the spotlight connection cable to the socket on the transformer and hand-tighten the union nut.
Commissioning/start-up
W A R N I N G
Possible death or severe injury from hazardous electrical voltage!
•
Prior to reaching into the water, isolate (switch off and disconnect) all units/devices used in the water.
•
Isolate the device (disconnect from the power supply) before carrying out any work on it.
N O T E
Sensitive electrical components. Incorrect connection will destroy the unit.
•
Do not connect the unit to a dimmable power supply.
Switching on:
Insert the power plug of the transformer into the socket.
•
Check the function of the spotlights.
Switching off:
Disconnect the transformer power plug.
Remedy of faults
S
Malfunction
Cause
Remedy
Lamp does not light up.
Power supply interrupted
Check power supply
Transformer defective
Replace transformer
Luminosity decreasing
Lamp glass soiled
Clean
Summary of Contents for PondoStar LED Set 6
Page 2: ... 2 A PSR0011 B PSR0013 C PSR0012 ...
Page 90: ...90 PSR0015 ...
Page 91: ...43312 09 17 ...
