PW336i
Hardware User Manual
19
8.1 General Description
The
PW336I
is to be controlled by the external
PC via the Ethernet control cable.
PowerTest
test software must be properly
installed on the PC to control
PW336I
. The
installation description of
PowerTest
test
system can be found in
PowerTest
user
manual.
To connect the computer to
PW336I
a
10M/100M Ethernet Network Interface Card
(NIC) must be installed in the PC. The
computer without network card could use a
UBS NIC. The drive program of NIC also
should be installed.
The computer with mounted NIC should be
able to log on Internet properly.
8.2 Set IP Address
The IP address of
PW336I
is internally fixed as
192.168.1.133 when dispatched from the
factory.
8.3 Steps for Setting IP Address
in PC
After the
PowerTest
is installed we need to
set the IP address for the computer.
The IP address must be set as
192.168.1.*
The first three section can not be changed and
the last section can be the number among
2~254 (except 133)
.
Steps for setting IP address for computer.
Step 1:
Left click ‘Start/Control panel/Network
connection’ (or right click the icon of “Network
Neighbour” and left click the ‘Properties’ of
drop menu) on the desktop of win2000 or
winXP
8
．
Getting Ready for PC Controlled
Operation
