PondXpert Filtobox PXBF06000 Manual Download Page 2

given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. 
Children should be supervised to ensure that they do not play with the appliance. 
For safety reasons, servicing or repair of this item should only be carried out by pondXpert. 
Never hang or carry the pump by the power cord. 
Do not operate the pump with a damaged cord or plug. The supply cord of the appliance 
cannot be replaced. 

 
If the electrical cord is damaged the product should be scrapped. 

 

Safety and Electrical Connections 

This unit is designed for outdoor use only. It is weatherproof and should be situated safely 
pondside. The filter should be sited where it cannot fall into the water or become 
waterlogged. 

NO PART OF THIS UNIT SHOULD EVER BE SUBMERGED IN WATER.

 

Direct exposure to UVC light can damage the eyes and skin. NEVER look directly at the 
UV when switched on. The translucent inlet will illuminate showing that the UV is working. 
Always disconnect all equipment in the pond before starting to handle, maintain, repair or 
install any pond equipment. 
 
The ultra violet clarifier housed within the pondXpert box filter is electrically operated so 
great care must be taken during installation and operation. The following electrical and 
safety guidelines must be carefully followed. 
 
Each filter is supplied with a length of 3 core electrical cable which is permanently 
connected to the ultra violet clarifier unit housed inside the filter. 

 

 
 
 
 
 
The termination to the mains supply should be permanent, inside a dry weatherproof 
enclosure, through a double pole switched fused spur with a minimum contact gap of 3mm 

 

(disconnected) to BS 3676 

 and fitted with a 3 or 5 amp fuse. 

Exposed cable runs should be sensibly positioned, and protected if necessary by armoured 
conduit. 
A 10mA or 30mA Residual Current Circuit Breaker (RCD) MUST be fitted to the mains 
supply. 

The wires in the mains electrical lead are coloured in accordance with the 
following code: 
BLUE 

 

Neutral (marked with an “N” in most terminal connections)

 

BROWN 

 

LIVE (marked with an “L” in most terminal connections)

 

GREEN/YELLOW 

 

EARTH (marked “E”

 or       in most terminal connections) 

1

st

 January 2005 revised Building Regulations for England and Wales 

Installing this product in the garden is classified as ‘notifiable’. The 

Regulations now require you to tell your local authority building control 
department that you intend to install this product before installation. Your 
local authority will let you know how you can get your installation approved 

Summary of Contents for Filtobox PXBF06000

Page 1: ... filter s three filter chambers and finally back out into the pond via the water outlet PondXpert filters are carefully inspected and tested to ensure both safety and operating performance However failure to follow the instructions and warnings in the manual may result in product damage and or serious injury Be sure to read and save this manual for future reference General safety Instructions Read...

Page 2: ...y operated so great care must be taken during installation and operation The following electrical and safety guidelines must be carefully followed Each filter is supplied with a length of 3 core electrical cable which is permanently connected to the ultra violet clarifier unit housed inside the filter The termination to the mains supply should be permanent inside a dry weatherproof enclosure throu...

Page 3: ... this inlet hosetail and secure with hose clips Maturation of the Filter Your multi chamber box filter comes complete with mechanical and biological filter media The filter foam acts as a mechanical barrier to pick up solids whilst the plastic bio media helps to develop friendly bacteria These friendly nitrifying bacteria help to convert harmful fish waste and other organic waste ie ammonia nitrit...

Page 4: ... gently pulling the retaining clips Unscrew the wired end cap by rotating anti clockwise Remove the UV bulb by gently pulling out of the electrical connection Insert a new UV bulb by gently pushing into the electrical connection Re assemble the end cap by rotating clockwise Clip the UV unit back into the top housing and reposition the top lid in place Limited Warranty This product is guaranteed fo...

Reviews: