background image

WARRANTY AGAINST DEFECTS

This product is warranted to the initial purchaser to 
be free of defects in materials and workmanship at 
the time of initial purchase and for a period of 2 
years for PondMAX™ Ultra Series pond/outdoor 
vacuum. Certain parts are consumable and must be 
replaced periodically as part of the ongoing product 
maintenance and are not covered by this warranty. 
These parts are the foam intake filter, suction poles/
hoses and dust bags inclusive. In the event this 
product malfunctions within 2 years from the date 
of purchase, the sole obligation of PondMAX USA 
(hereinafter referred to as PondMAX™) will be to 
repair the unit or replace with an equivalent new 
or factory refurbished unit at PondMAX’s discretion, 
subject to the following conditions:

•  The malfunction is proved attributable to a defect 

in materials or workmanship, including repairs 
performed under this warranty. Malfunction for 
any other reason-including but not limited to 
misuse, negligence, accident, or tampering with 
parts, incorrect wiring, or improper installation-will 
not be remedied under this warranty.

•  PondMAX™ specifically does not guarantee 

chemical compatibility, and expressly does not 
warrant units from any problems caused by 
chemical attack or failure due to incompatibility of 
fluid being circulated through vacuum.

•  All warranty repairs must be performed by 

PondMAX™ or a PondMAX™ authorized 
company.

•  Purchaser must retain the purchase receipt 

and present it with this certificate as proof of 
ownership and entitlement to warranty repairs. 
Unauthorized repairs will not be compensated 
by PondMAX™, and are not the responsibility 
of PondMAX™, and if such repairs damage the 
product, such damages are not remedied under 
this warranty.

•  Purchaser shall bear all shipping, packing and 

insurance costs and all other costs, excluding 
labor and parts necessary to effectuate repairs 
under this warranty.

•  This warranty is in lieu of all other express 

warranties which now or hereafter might otherwise 
arise with respect to this product. Any and all 
limited warranties, including the warranties of 
merchantability and fitness for particular purpose, 
shall have no greater duration than the duration 
period of the express written warranty applicable 
to this product, and shall terminate automatically 
the expiration of such duration period. Some 
states do not allow limitations on how long an 
implied warranty lasts, so the above limitation 
may not apply to you. No action shall be brought 
for breach of any implied or express warranty 
after 90 days subsequent to the expiration of the 
duration period of the express written warranty.

PondMAX PV350L Instructions US.indd   6

4/12/2013   7:12 am

Summary of Contents for PV350L







Reviews: