PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
2. Untie the drawstring on the pump barrier bag and then remove the
pump from the pump barrier bag. Clean the pump barrier bag then
place the pump back inside the pump barrier bag and test the pump.
Fig. 8
NOTE: If the pump performance is still unsatisfactory, unplug the
pump and proceed to step 3.
Fig. 8
3. Remove the front cover from the pump. Fig. 9
Fig. 9
4. Remove the impeller cover to expose the impeller assembly.
Remove the impeller assembly by gently pulling on the impeller
blades. Use a soft cloth or brush to clean the impeller assembly
and inside of the impeller housing. Fig. 10
Fig. 10
5. Remove the locking screw, which is located on the bottom of the
pump. Fig. 11
Fig. 11
6. Remove rear cover by gently pressing on the sides and pulling it
away from the pump. Fig. 12
Fig. 12
Untie
drawsting
Press
here
