background image

 

                                                        

Pressurized Filter 

Up to 1250 gallons 

 

ITEM #FP1250UV

 

 

PACKAGE CONTENTS 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 

  WARNINGS AND CAUTIONS 

WARNING 

 

DO NOT SUBMERGE THE LIGHT ASSEMBLY. 

 

WARNING – Improper connection of the appliance-grounding conductor can result in a risk of electric 
shock. Check with a qualified electrician or service representative if you are in doubt whether the 
appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the 
outlet, have a proper outlet installed by a qualified technician. 

 

If the appliance falls into water, DO NOT reach for it!  First, unplug it and then retrieve it. If electrical 
components of the appliance get wet, unplug the appliance immediately.  

 

Do not operate any appliance if it has

 

a damaged cord or plug, or if it is malfunctioning or

 

if it is 

damaged in any manner.  

 

Always unplug the appliance from the outlet before putting on or taking off parts, before cleaning or 
when not in use. 

 

Connect only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI). 

 

Risk of Electric Shock - Do not use the UV filter if the quartz tubing around the lamp is broken. 
Immediately unplug and seek an authorized repair service or discard the unit. 

Part 

Description 

Quantity 

Tank with  UV clarifier 

O-ring 

Cover 

Lid 

Bio media balls 

12 

Coarse filter 

Fine filter 

Adapter 

Gasket 

Locking ring 

Small adapter 

Small gasket 

REMINDER 

CALL 1-888-755-6750 

BEFORE RETURNING TO STORE. 

Questions, problems, missing parts? 

Before returning 

to your retailer, call our customer service department at  
1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or 
email us at [email protected].  Or visit our 
website www.thepondboss.net. 

 

 

PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE. 

                      WWW.THEPONDBOSS.NET

 

Summary of Contents for FP1250UV











Reviews: