PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
ASSEMBLY INSTRUCTIONS
1. Choose a location for your waterfall spillway, it can sit inside
the liner or at the liner perimeter. Most of the time it is placed
at the beginning of a stream. The important thing to remember
is that all of the water coming out of the filter must stay within
the pond liner to avoid water loss. Fig. 1
Fig. 1
2. Place the tank in the place that you prepared for it and check
that it is level before burying. Fig. 2
Fig. 2
3. Check the liner will sit freely up your tank without wrinkling or
pulling. Carefully clean and rinse the liner inside and out with
water, then dry it with paper towels or a clean cloth. The
surface to be sealed must be clean and dry for the sealer to
bond properly. Mark the liner with the shape of the spillway. A
white or yellow marker works well to do this. Fig. 3
Fig. 3
Waterfall returning directly to pond
Waterfall with stream
