VISIT WWW.THEPONDBOSS.NET FOR PRODUCT INFORMATION AND TIPS.
EN
4
OPERATION INSTRUCTIONS
Step 1
. If using the clear lenses,
skip to step 3. If you would
like to use the colored lenses,
rotate the lamp retaining ring
counterclockwise to remove the
clear lenses.
Step 2
. Make sure the o-ring sits in
the groove as shown and insert the
colored lenses you desire to use.
Attach the lamp retaining ring by
rotating clockwise, and make sure
that it is secure.
Step 3
. Connect the sensor to the
transformer and the sensor to the
light(s) by pushing the plug into the
sensor socket and hand tighten the
nut around the plug and socket to
secure.
Step 4
. Place the light(s) in or out
of the water. Make sure that the
transformer and sensor are not
submerged and the sensor is facing
up.
NOTE: At night, the lights will
automatically turn on. At sunrise,
they will automatically turn off.
Step 5
. Plug the transformer into a
properly grounded electrical outlet.
GFCI
outlet
1
2
3
4
3
5
