h)
Enter again in menu „2.Mobil No.1“ and check if the number you´ve inserted is correct
i)
Confirm by pressing Enter button
j)
Control unit asks you: „O.K. call?“
k)
Confirm by pressing Enter and display shows „dialling..“
l)
Your mobile phone will start to ringing
m)
Pressing Enter button will stop the call
n)
Return into main display by escape button
Connection confirmation:
1)
Send text message in format: “STATUS” to number of SIM card you´ve inserted into GSM
module
2)
After few seconds display reads:
“SMS STATUS” and “SMS send”
3)
You´ll receive text message in format:
DISPLAY=”MANUAL
HH:MM” T=025 PT=1 BT=0 MODULACE=1 Pon=05 Poff=45 V=45
Note: DISPLAY……… actual mode or text on display and actual CU time
T…………………. actual boiler water temperature
PT……………….. room thermostat input activated=1 or disconnected=0
BT………………..hot water tank activated=1 or disconnected=0
MODULACE… modulation mode enabled=1 or disabled=0
Pon…………….. time of running feeder 1 in actual program
Poff…………….. time of pause of feeder 1 in actual program
V…………………. value of primary fan in atual program in %
Note 2 : If you´re using pre-paid SIM card, you´ll need to insert also number for your account balance.
This can be done in menu 8.GSM modem/4.Credit No.
Then you´ll receive in SMS also balance of your sim card.
18.11.2013 MB
