MOUNTING THE CONTROL PAD AND CAMERA ARM
9
To position the control pad mounting plate:
1
Punch holes in the control pad positioning template at the
locations of the four screws.
2
Fold the control pad positioning template along the dotted line
to form a shelf, as shown.
3
Position the folded control pad positioning template on the LEFT
BOTTOM edge of the board, as shown. This indicates the ideal
position and the minimum distance from the board.
4
If possible, locate a metal or wooden stud that is nearest this
position.
5
Mark the four screw hole positions on the wall using an awl, a
pencil, or marker so that at least one fastener will attach to the
stud, if possible.
6
Remove the template.
To install the control pad mounting plate:
1
At positions that do NOT align with a stud, drill 1/2 inch holes at
the marked positions, using caution not to make the holes too
large, and install a toggle bolt (provided) at each position as
follows:
Installguide_RevA_4.fm Page 9 Friday, January 18, 2002 11:05 AM