Doc # 100128 | Rev D | Page 8 of 10
Privacy | Modesty
Read all assembly directions before beginning
installation.
Use
all
panel clamps for the required positions.
This setup can only be used with the following sizes:
18” x 24”, 18” x 36”, 24” x 24”, 24” x 36” or 385 mm x
585 mm, 385 mm x 785 mm, 585 mm x 585 mm,
585 mm x 785 mm
Step 1
Turn the clamp screw to be tight with the
table surface. Identify anti slip pads to be
face down.
Step 2
Direction of clamp should be positioned to
grip the panel on left and right sides.
Step 3
Insert panel. Hand tighten screw with allen
wrench until it will go no further.
Step 4
Hand tighten screw with allen wrench until
it will go no further (right clamp).
Step 5
Attach hole covers.
