Polytron SPM 200 LAN, Manual

Page: 17 / 24

17
10.3 Activating the default setting (factory setting)
In stand-by mode, press the button (right) until the display shows Program / Service . Now call up the factory set-
ting according to the following program flow. The functions of the SPM 200 LAN are checked then and the factory
settings will be restored. The routine is completed if the headend jumps back again in the stand-by mode automati-
cally, shown in the display.
Stand-by mode
Switch to Service
Polytron Headend
SPM A.1
← Reset →
↨ Update
→
Service
↨
Program
→
Program
↨
Service
Select Reset
Stand-by mode, shows the
software version
Factory settings will be
restored
Confirm restoring of factory
setting by
Yes
Restart, loads data from the
memory
Restore Defaults
← Yes →
Restoring
Factory Settings
Polytron Headend
SPM A.1
Polytron Headend
Loading Data...