Polytron PCU 4111, User Manual

Page: 19 / 52

19
Clicking on a service in the output list and clicking on the command Remove removes this service from the
output list (also double-clicking on a service in the output list removes the service automatically).
By single-clicking on the
Save/Back button, the output list is saved and the window is automatically closed.
If you want to choose only a few services from a transponder containing many services, you can first click on
Remove ALL and then select the required services.
8.3.2. Selection of the channels to be decoded
Insert the CAM module with the appropriate smart card into the CI slot.
In case of not inserted or not detected CAM module following information appears:
Note: If the CAM module is not detected not any service can be decoded!
Encoded as well as non-encoded services can be selected and processed together.
With a click on the
Save/Back button the output list is saved and the window is automatically closed.
The CAM modules should be only inserted in
power-off mode of the unit.
The still available data rate is
shown in the field
“Rem. Bitrate”.
This should be at least 5.000 kSym.
Selection of desired services which
should be encoded by applying a
check mark.
DVBCommunity - c ообщество профессионалов ЦТВ
https://dvbcommunity.ru/