31
Video Format:
Mpeg2 or H.264
Standard: H.264
Video Bit Rate:
Set value between 1 and 19 Mbps
Default: 8 Mbps
Audio Format:
Mpeg2, Mpeg2 AAC or Mpeg4 AAC
Standard: Mpeg2
Audio Bit Rate:
Selection: 64, 96, 128, 192, 256, 320 kbps.
Default: 192 kbps.
Program Out enable:
If there is no signal only the channel name will be shown.
If an input is not used, the program can be here switched off.
With the hook you choose also the output channel (A up to D)
Program Name:
Assign a free selectable name to the program.
Service ID, PMI, Video, Audio und PCR PID:
The system creates automatically the default settings.
Is the PID already used in the system, the user has to change this settings.
Video and Encoding:
The points should light green.
Video Format:
The format of the input signal is shown.
Bitrate:
Displays the current encoding bitrate.
Apply:
Click this button to apply the modified parameters.
Default:
Click this button to apply the default setting.
