6
19
RADIO OPERATING INSTRUCTION
Choose the signal strength based receiving position
1. If the unit position is far from the radio transmitter, activate the FM DX
function. FM DX mode is used to strengthened the radio signal although the
distance is far away from the unit position. Press “A-B” button on the
remote control to activate the FM DX mode. FM DX is active indicates by FM DX appearance for a moment
and A icon lights up on the VFD screen.
2. If the unit position is near from the radio transmitter, activate the FM LOCAL
function. FM DX mode is used to suppressed the excessive noise and
humming caused by the unit position is near the radio transmitter. Press
“A-B” button on the remote control to activate FM LOCAL mode. FM LOCAL is active indicates by FM
LOCAL appearance for a moment and B icon lights up on the VFD screen.
Manual Tuning
1. Press “FUNCT” (function) button on the remote control or press “AM/
FM” button on the front panel to select TUNER.
2. Press “SLOW / AM/FM” button on the remote control or press “AM/
FM” button on the front panel to change to AM band. Radio frequency will be
changed each time you press “
” / “
” button.
Automatic Tuning
Press “
” / “
” button more than 2 seconds until the unit start searching the radio broadcast. The
searching will stop when the unit find a radio station indicates by TUNED indicator lights up on the VFD screen.
The searching will not stop if the sugnal of the radio station is too weak.
Note :
Adjust AM LOOP antenna position and direction to get the best AM reception. Adjust FM TELESCOPIC atenna
to get the best FM reception. FM stereo indicator will lights up if the unit received Stereo FM broadcast and
will lit if the unit received Mono FM broadcast.
Direct Tuning
DIRECT TUNING is used to find a radio station correctly according to the inserted wave of the radio station.
1. Press “GO TO” button to select DIRECT TUNING function.
2. Press “0” - “9” numeric buttons according to the known radio wave,
example if you wanrt to listen NET FM radio broadcast with 106,80 MHz
wave, so you just press “1”, “0”, “6” and “8” numeric buttons.
3. Press “GO TO” or “ / ” button to go to the radio frequency inserted wave.
Presetting the Radio station
The unit can saved 40 radio station for AM and FM band. If you are saved a radio station, a number will
represent it. Use the memori preset number to select the radio directly.
1. Select the AM or FM frequency band, then press “
” / “
” button to search for a radio station.
2. After caught a broadcast, press “PROG/MEM” button on the remote
control. _ _ character are blinking on the VFD screen.
3. Press “0-9” or “
”/“
” button to insert the memory number.
4. Press “PROG/MEM” button again on the remote control to save the
memory number.
5. To delete the memory program, press and hold “ ” (stop) button on the
remote control or on the front panel.
REAR PART OF THE UNIT
Audio Out / Line Out
DVD / VCD / VCR PLAYER
Line In
TV
Video & Audio Input
Video & Line Out
REAR PART OF
THE UNIT
TV / LCD
/ MONITOR
Video Component Input
Audio Input
Line Out
Video Component Out
REAR PART
OF THE UNIT
AV RECEIVER
Coaxial Input
Coaxial Out
REAR PART OF THE UNIT
MP3 IN
MP3/MP4 PLAYER
LINE OUT / AUDIO OUT
/ HEADPHONES
PHONES terminal
You can listen the sound of the unit through the stereo headphones, connect stereo headphones to Phones
terminal. The both speaker will mute when you connect a headphone to the headphone terminal.
LINE IN terminal
You can enjoy audio output from other unit (Laser Disc, Mini disc player, Video Cassette Recorder or TV that
has audio out) through this unit. Connect LINE IN terminal to the others equipment LINE OUT terminal using RCA
cable.
DVD COMPONENT OUT terminal
To get the better picture from DVD player of the unit, use YPbPr of the DVD COMPONENT OUT as video source
of the TV. Connect YPbPr terminal of the unit to the YPbPr terminal of the TV using RCA cable.
VIDEO OUT dan LINE OUT terminal
You can enjoy the picture of the unit’s DVD player through the TV. Connect VIDE OUT and LINE OUT terminal
to the AV IN terminal of the TV using RCA cable. If you connect this unit to the TV using VIDEO OUT and LINE
OUT terminal, you should select VIDEO AV as TV input.
COAXIAL DIGITAL OUT terminal
If you has AV Receiver with Coaxial Digital In terminal, so then you can connect Coaxial Digital Out of the unit
to get the perfectness of 5.1 channel sound system.
MP3 IN terminal
If you has MP3/MP4 player, you can use the unit as amplifier by connecting MP3/MP4 player output terminal
to the MP3 IN terminal of the unit using 3.5 mm stereo jack.
Note : When you are connecting MP3/MP4 player output terminal to the MP3 IN terminal, LINE IN function of
the unit is automatically changed to MP3 IN function.
