Polytec PSV-500, Hardware Manual

Page: 24 / 109

3-10
3 First Steps
Generator board The connections of the Spectrum M2i.6030 generator board are shown in the
following figure.
Figure 3.7: View of the generator board
1 Ck clock input (SMB jack)
Input for the clock signal (Clock) to synchronize the generator board with the data
acquisition board
2 Trg signal input (SMB jack)
Input is not used !
3 D 1 pulse output (SMB jack)
Output is not used !
4 D0 pulse output (SMB jack)
Synchronization pulse for the signal of the function generator
5 Ch 0 signal output (SMB jack)
Signal output of the function generator
C k Trg D 0 Ch 0
3 4 1 2
D 1
5